Planning your implant on screen
When implants were first placed, the surgeon often decided the exact position during the operation, looking at the bone once the gum was opened. Good surgeons did good work that way, but it meant the teeth had to be fitted to wherever the implants ended up.
Today I do it the other way round. The surgery is planned in full on a computer before you come in for it, and it starts with the teeth, not the implants.
Teeth first, then implants
The two scans from the last two posts come together here. The CBCT gives me the bone, the nerve and the sinus in 3D. The intraoral scan gives me the exact surface of your teeth and gums. The software lines the two up so I'm looking at one model of your mouth, inside and out.
On that model, I design the final teeth first in exocad: their size, shape and position, how they meet the teeth in the other jaw, and how they sit under your lip when you smile. Only once the teeth look right do I place the implants, underneath them, where they can support those teeth properly.
The order matters more than it sounds. An implant placed where the bone happens to be convenient can end up at an angle that makes the final tooth look wrong or hard to clean. Planning from the teeth backwards avoids that.
Placing each implant
In the planning software, exoplan or Blue Sky Bio, I choose an implant from a library of real implant shapes, in the exact length and width of the one I'll use. I then move it in the 3D scan until it's where it needs to be, checking it from the front, the side and from above.
For each implant I'm working out three things. Its size, so it is as long and wide as the bone safely allows. Its angle, so the screw access and the crown line up with the teeth I designed. And its depth, so the top sits at the right level under the gum for a natural-looking result.
Safety margins
Patients rarely see this part of the planning, but it is where the 3D scan matters most. The software shows the distance from the implant to everything around it, to a tenth of a millimetre. There are minimum distances I keep to.
- In the lower jaw, the implant stays a safe distance above the nerve that gives feeling to the lip and chin, usually at least two millimetres.
- In the upper jaw, I check the floor of the sinus. If there isn't enough height, the plan changes to a shorter implant, a sinus lift, a tilted implant or a different type of implant.
- Next to natural teeth, the implant keeps a gap of about one and a half millimetres from the root.
- Between two implants, a gap of about three millimetres leaves room for bone and gum between them.
- On the cheek and tongue side, enough bone has to remain around the implant to keep the gum healthy over the years.
If any of these can't be met, I can see that on screen before anything happens, and the plan is adjusted. That might mean a bone graft, or it might mean a different approach altogether, like the tilted implants used in All-on-4 or zygomatic implants for severe bone loss.
From the screen to surgery
A plan is only useful if it can be followed exactly. So from the finished plan, a surgical guide is designed and 3D-printed. It's a thin, rigid template that fits snugly over your teeth or gums, with a metal sleeve for each implant. During surgery, the drill passes through those sleeves, which hold it at the angle and depth I chose on screen.
Guided surgery usually means a smaller opening in the gum, and sometimes no cut at all, which tends to mean less swelling afterwards. I'll describe how that day goes in the next chapter.
Seeing your own plan
Before surgery, I go through the plan with you on the screen. You can see your bone, where each implant will go, and what the final teeth will look like. This is a good time to ask anything you're unsure about, and to change anything you'd like to look different.
If you've had a CBCT scan elsewhere, you're welcome to send it on WhatsApp. Looking at it, I can usually give you an idea of what kind of plan to expect.
Digital planning is included in our implant price. See the full dental implant cost in Delhi list for what each package covers.
Questions
What is digital implant planning?
It means placing each implant on a computer before surgery. The CBCT scan of the bone and a 3D scan of the teeth are combined, the final teeth are designed, and each implant is positioned virtually underneath them at the right size, angle and depth.
What is a surgical guide?
A thin 3D-printed template that fits over your teeth or gums during surgery. It has a sleeve for each implant that steers the drill to the exact position, angle and depth chosen in the digital plan.
Can I see my implant plan before surgery?
Yes. I go through the plan with you on screen, showing where each implant will sit in the bone and how the final teeth will look.
Next · Wed 11 Nov
Single tooth implant cost in India: what the price should include. What a full implant tooth is made of, and what a fair quote should cover.
Previous
Goodbye to impression trays
